Vinyl Floor Tiles —
stone, terrazzo & large-format looks.
We manufacture square and large-format vinyl tiles that replace ceramic, porcelain and natural stone — in stone, marble, terrazzo, concrete, micro-cement and woven-carpet visuals. Waterproof, dimensionally stable, and supplied factory-direct to importers and distributors across Europe, the UK, North America and Australia.
Vinyl floor tiles are resilient tiles — LVT and SPC — pressed and cut to square and large-format rectangular formats rather than linear planks. They give a project the look of stone, terrazzo, marble or polished concrete with a fraction of the weight, none of the cold underfoot, and full waterproof performance.
We see tiles specified where the design calls for a monolithic, hard-surface aesthetic — retail floors, offices, hospitality, healthcare and modern residential wet areas — and where the format itself matters: large squares lay out differently from planks, with grid alignment, grout-line emulation and feature borders that a linear plank cannot reproduce. If your project is wood-look and linear instead, our Luxury Vinyl Plank range is engineered for that form factor.
Trending tile looks for 2026
The demand we are seeing from importers is concentrated in hard-surface, aggregate and textile visuals — not wood. These are the five tile families we tool for most often:
Tile construction — three systems
The same tile look is available in three constructions. We match the construction to the project’s subfloor, traffic and installation method — not to a single house standard.
- Hospitals, malls, schools, retail
- Extremely stable; bonded with LVT/VCT adhesive
- Thickness 2.0 / 2.5 / 3.0mm
- Stone-based rigid core; best for wet areas
- Bathrooms, kitchens, renovation
- Thickness 4–7mm
- No glue, no click — fast install
- Removable & reusable; raised-access floors
- Thickness 5mm
Technical parameter matrix
We characterise every tile against the European and ASTM resilient-flooring standards procurement teams audit against. These are the metrics that decide whether a tile holds flat and bonded on a commercial job — not marketing adjectives.
| Technical property | Testing standard | Value | B2B engineering value |
|---|---|---|---|
| Dimensional stability | EN ISO 23999 / ASTM F2199 | ≤ 0.10% | Minimal thermal variance — prevents joint gapping under direct sunlight and HVAC cycling. |
| Core density (SPC) | ISO 1183 | 1.95–2.05 g/cm³ | The verifiable basis of dimensional stability; auditable by any accredited lab. |
| Residual indentation | EN ISO 24343-1 / ASTM F1914 | ≈ 0.05 mm* | Rapid elastic recovery under rolling loads and heavy furniture; resists permanent tracking. |
| Peel / bond resistance | EN ISO 24345 | ≥ 50 N/50mm* | Thermal-fused wear layer resists delamination under shear from wheeled traffic. |
| Impact sound reduction | ASTM E2179 (IXPE underlay) | ΔIIC 21 dB | Pre-attached IXPE dampens impact sound for premium offices and multi-storey fit-outs. |
| Reaction to fire | EN 13501-1 | Bfl-s1 | Highest practical floor-covering fire class for commercial and public buildings. |
| Wear / use class | EN 685 | Class 33 / 42 / 43 | General to heavy commercial, set by wear-layer thickness (0.3–0.7mm). |
| Water absorption | — | 0% · waterproof | The mineral-PVC body does not absorb moisture — suitable for wet areas and below-grade. |
*Residual-indentation and peel-resistance values are per third-party test report; request the current technical data sheet for batch-specific figures. The dimensional-stability figure of ≤0.10% reflects the core density — the science is in our 3:1 calcium-to-PVC core guide.
Formats & sizes — square & large-format
Tile format is the differentiator. We tool square and large-format rectangular tiles that lay out on a grid — the geometry plank product cannot reproduce. Common formats below; we also cut custom sizes for OEM programmes.
If your project is linear and wood-look, the right product is a plank, not a tile — see our Luxury Vinyl Plank range. Keeping tile and plank enquiries on the right page means you get the correct size grid, layout pattern and edge detail the first time.
Where vinyl tiles are specified
- Retail & supermarkets
- Hotels & hospitality
- Offices & co-working
- Healthcare
- Schools & public buildings
- Showrooms, gyms & malls
- Kitchen
- Bathroom
- Basement
- Living areas
- Hallways
- Utility & entry
OEM / ODM for wholesalers & distributors
We manufacture for importers, distributors and project builders under their own brand. The tile look, the size grid, the packaging and the documentation are yours.
- Private-label tile manufacturing
- Custom design — colour, pattern, embossing, surface finish
- Custom tile sizes & formats (OEM tooling)
- Custom packaging & branding
- Sample books, A4 samples, display boards
- Retail display racks & showroom stands
- CE Declaration of Performance in the importer’s name
- EN ISO 23999, EN 685 and density test reports
- FloorScore / GREENGUARD Gold certificates
- Technical data sheets & spec sheets
- Marketing material for your channel
About our factory
We run ISO 9001-certified SPC and LVT production across East China, integrating our manufacturing hubs in Changzhou and Jiaxing. Established in 2017, the operation spans 66,000 m² of workshops with 200+ workers and automated production lines, supplying resilient flooring to Germany, the Netherlands, the UK, France, Italy, Australia, Canada and the USA.
Why importers choose us
Factory-direct pricing with no trading-company margin · CE, REACH and SGS tested · stable supply and controlled lead times · proven export experience to Europe and North America · strict QC at every production stage. Full certification detail on our certifications page.
Vinyl floor tiles — technical FAQ
Specifying vinyl tiles? Get the spec pack.
Tell us the look (stone, marble, terrazzo, concrete, woven), the format and the construction, and we’ll send the technical data sheet, certification list and a sample kit. Factory-direct from Changzhou and Jiaxing, with OEM/ODM and CE DoP in your name.