SPC & Vinyl Flooring for Malaysia — Factory-Direct Supplier
Factory-direct SPC rigid plank, LVP click and stone-look vinyl for importers, distributors and project contractors in Kuala Lumpur, Klang, Penang and Johor Bahru. 100% waterproof and termite-proof for Malaysia’s tropical climate, with SIRIM-ready test documentation. FOB quote within 24 hours.
One factory for SPC plank, LVP click and stone-look tiles
Malaysia’s flooring market runs on imports, and distributors win by sourcing direct from the factory: lower landed cost, one consistent set of test reports for SIRIM, and stock you can build a regional range around — many Malaysian suppliers serve Singapore and Myanmar from the same inventory. Ecoflors manufactures under ISO 9001:2015 at its production hubs in Changzhou and Jiaxing, China, and has exported to 60+ countries since 2017.
For Malaysian projects, three things decide the spec: moisture and termite resistance in a tropical climate, fast “no-hack” installation over existing tiles, and SIRIM / low-VOC compliance for commercial, F&B and healthcare work. All three families below are built around exactly those priorities.
Why vinyl beats tile and timber in Malaysia
Malaysia’s heat, humidity and termites are hard on timber, while ceramic tile brings hollow-sounding lift and bacteria-trapping grout lines. A rigid SPC core answers all of it — and installs without hacking out the old floor.
Humidity & termites
In a tropical climate, timber warps and attracts termites. SPC and LVT are 100% waterproof and termite-proof — they will not swell, rot or feed pests, so they hold up in kitchens, bathrooms and ground-floor units.
“No-hack” renovation
The rigid SPC core lays straight over existing ceramic tiles with minimal subfloor prep — no hacking, no debris, far less downtime. A major advantage for condo and shoplot renovations on tight schedules.
Quiet, hygienic surfaces
Unlike ceramic tile, vinyl is quiet underfoot and has no porous grout lines to trap grease and bacteria — preferred for F&B, clinics, offices and retail where hygiene and acoustics matter.
Choose the right construction for your project
Quick comparison. Tap each card for the product page with thicknesses, wear layers, EN 685 use classes and full technical documentation.
SPC Rigid Plank (Click)
The most-specified choice for Malaysia: dense stone-polymer core, 100% waterproof and termite-proof. Lays over existing tiles with the click-lock system — no hacking — for condos, shoplots and commercial fit-outs.
- 100% waterproof · termite-proof
- Dimensional stability ≤ 0.10% (EN ISO 23999)
- “No-hack” floating click installation
LVP Click (Wood-Look)
Flexible-core luxury vinyl plank with a floating click system — softer and quieter underfoot than rigid SPC, with realistic wood looks. A favourite for residential and hospitality interiors that want warmth and comfort.
- Warm, realistic wood decors
- Softer, quieter underfoot · sound absorption
- Waterproof · floating click install
SPC Tiles — Stone & Marble Look
Marble and stone visuals without porous grout lines or the hollow lift of ceramic tile. Large formats for retail, lobbies, offices and villas — the hygienic, quiet alternative to traditional tile in Malaysia.
- Marble · stone · terrazzo decors
- No grout lines to trap grease or bacteria
- Rigid SPC core · 100% waterproof
Performance that backs every container
Typical range values, confirmed against third-party test reports — the same reports your importer uses for SIRIM submission. Request the TDS for the exact article’s batch values.
SIRIM & low-VOC compliance
For Malaysian commercial, F&B and healthcare projects, buyers look for SIRIM certification and low-VOC labels. SIRIM certification is applied for by the local importer or brand owner — our role is to supply the test reports and technical documentation (low-VOC FloorScore / GREENGUARD Gold, reaction-to-fire Bfl-s1 / EN 13501-1, and the TDS) so your SIRIM submission and project tenders go smoothly.
Import & logistics
Tariff classification HS 3918.10. FOB Ningbo / Shanghai to Port Klang, Penang Port and Johor (PTP). Under the ASEAN–China FTA (ACFTA), a preferential tariff may apply with a valid Form E certificate of origin; your forwarder confirms the exact duty and SST.
- MOQ: 800 m² / SKU
- Production: 15–25 days by volume
- Container loading optimised by weight
- OEM / ODM: own brand, packaging & décor
Documents with every order: commercial invoice, packing list, Form E certificate of origin, FloorScore / GREENGUARD Gold, fire and TDS reports for SIRIM, per article.
What Malaysian buyers ask
Is SPC flooring really termite-proof and waterproof for our climate?
Can SPC be installed over my existing ceramic tiles without hacking?
Do you provide SIRIM certification for Malaysia?
Which product suits commercial, F&B and healthcare projects?
What is the minimum order, and which areas do you serve?
Request pricing & samples for Malaysia
Tell us the thickness, wear layer, use class, décor and annual volume. We respond within one business day with the FOB price, container loading plan, and the document set your importer needs for SIRIM (FloorScore · GREENGUARD Gold · fire · TDS) plus the HS code and Form E for your forwarder.
Factory-direct from Changzhou and Jiaxing, China · serving 60+ countries since 2017