Marine Vinyl Flooring
& Teak Vinyl Flooring
for Boats & Yachts
Factory-direct marine vinyl flooring and teak vinyl flooring for boats, yachts, pontoons, and houseboats. Teak and holly designs, 2mm–3mm glue-down LVT, 0.55mm wear layer. OEM/ODM available from MOQ 3,000 m². Wholesale to US, EU, and Australia.
Why Teak Vinyl Flooring
Replaces Real Teak on Modern Boats.
Traditional teak decking — whether solid or teak and holly plywood — remains the aesthetic benchmark for boat flooring. However, the operational and maintenance demands of real teak make it increasingly impractical for production boat builders and refit yards operating at commercial scale.
Real teak requires annual oiling or sanding, swells and contracts with moisture cycling, develops grey weathering on unprotected surfaces, and costs significantly more per square metre than vinyl alternatives. Furthermore, sustainable teak sourcing is increasingly restricted under CITES regulations, driving builders toward alternatives that replicate the teak and holly appearance without the wood content.
Marine vinyl flooring — specifically 3mm glue-down LVT with a teak and holly print layer and 0.55mm wear layer — replicates the visual and tactile character of teak decking at a fraction of the cost, with zero maintenance requirements and a fully sealed PVC structure that does not absorb water, swell, or support mould growth. Consequently, teak vinyl flooring for boats is now the standard specification in production powerboat and pontoon manufacturing.
| Comparison | Real Teak Deck | Marine Vinyl Flooring |
|---|---|---|
| Material cost | High | Low–medium |
| Installation time | Long — specialist required | Fast — glue-down LVT |
| Annual maintenance | Oil, sand, seal | None required |
| Water absorption | Swells with moisture | Zero — sealed PVC core |
| Mould resistance | Moderate | Excellent |
| Teak & holly appearance | Authentic | High-fidelity print + EIR |
| Weight | Heavy | Lightweight (3mm LVT) |
| CITES / sourcing concern | Increasing restriction | None — PVC material |
| OEM customisation | Limited | Full — width, colour, pattern |
Why a 0.55mm Wear Layer Matters
in Marine Environments.
The wear layer is the functional surface of the LVT. In cabin and cockpit environments, foot traffic combines with grit, sand, and moisture — an abrasion profile more demanding than a standard residential floor. A 0.3mm (12 mil) wear layer that performs adequately in a home will show visible surface wear in a marine cabin within 18–24 months under moderate use. The 0.55mm (22 mil) wear layer used in Ecoflors marine LVT provides the same abrasion resistance as a Class 33/42 commercial floor covering — extending the practical service life to 10+ years under normal boat use.
Marine Vinyl Flooring —
Complete Technical Specification.
The following specification covers the standard Ecoflors glue-down marine LVT product supplied to wholesale importers, boat builders, and refit yards in the US, EU, and Australia. All parameters are independently verified. Custom dimensions, thicknesses, and wear layer specifications are available for OEM orders above the custom MOQ.
| Parameter | Specification |
|---|---|
| Product type | Glue-down Luxury Vinyl Tile (LVT) · marine grade |
| Thickness | 2.0mm · 2.5mm · 3.0mm |
| Wear layer | 0.55mm (22 mil) standard · 0.5mm available |
| Sheet dimensions | 965×1245mm · 965×1560mm |
| Surface construction | Wood embossed (EIR) / Crystal |
| Surface treatment | UV/PU coating · Matt or semi-matt finish |
| Non-slip rating | R10 (DIN 51130) — equivalent to commercial LVT standard |
| Core structure | 100% PVC — zero wood fibre content |
| Water resistance | Fully sealed PVC structure — no absorption |
| Installation method | Full-spread glue-down (Glue Down) |
| Application environment | Indoor — cabin, cockpit, below deck, saloon |
| Warranty | 10 years (commercial use) |
| Design options | Teak & holly (3 tones) · custom OEM available |
| MOQ (wholesale) | 3,000 m² per SKU |
| OEM/ODM | Custom width · strip colour · dimensions |
| Lead time | 15–25 days from order confirmation |
Key Installation Points
for Boat Flooring.
Production powerboat, pontoon, and houseboat manufacturers specify marine vinyl flooring as a standard cabin fit-out material. The priority is batch consistency across a full production run — colour matching between hulls, consistent surface texture, and stable supply at volume. Ecoflors provides the same-batch certification documentation per container, ensuring colour and texture consistency across a multi-vessel production run. Custom OEM plank widths and holly strip colours are available for branded installations.
Refit yards replacing worn teak decking or damaged flooring in existing vessels need accurate material matching to existing designs and reliable short lead times. Ecoflors’ three standard teak tones (light, medium, dark) cover the majority of common teak and holly patterns in production. Furthermore, physical sample kits are dispatched within 5 business days — enabling yards to confirm the correct tone before committing to a full order. MOQ 3,000 m² applies to standard SKUs; discuss smaller quantities for refit-specific requirements.
Marine flooring distributors in the US, EU, and Australia purchasing factory-direct for resale to boatyards and chandleries. The primary advantage of direct factory sourcing is the 15–25% FOB saving compared to purchasing through intermediaries. Ecoflors provides full commercial documentation: packing list, certificate of origin, and product data sheets suitable for customs clearance and trade customer specification submissions.
Standard planks range from 75mm to 200mm wide. Custom widths are available for production boat builders who require a specific plank-to-holly ratio that matches the vessel’s design language. Wide planks (150–200mm) give a contemporary feel; narrow planks (75–100mm) replicate classic teak and holly aesthetics more closely.
Standard holly strip is white — replicating traditional teak and holly boat flooring. Grey and black strips are available for contemporary vessel interiors. Custom RAL or Pantone colour matching is available for branded OEM orders. Strip width is independently adjustable from 2mm to 8mm regardless of plank width selection.
The MOQ for custom OEM marine vinyl flooring is 3,000 m² per SKU. This covers approximately one 20ft container of 3mm material (approximately 4,500 m² per 20ft for 3mm LVT at ~5.5 kg/m²). Lead time for custom OEM is 20–30 days from design approval. Ecoflors provides a production sample for approval before full production begins.
See the Teak & Holly
Installation Process.
The video demonstrates the glue-down installation process for teak and holly marine vinyl flooring in a cabin environment — including substrate preparation, adhesive application, butt-joint seaming, and the final surface result. The 0.55mm wear layer and EIR surface texture are visible in close-up detail.
Marine Vinyl Flooring —
Frequently Asked Questions
Ecoflors marine LVT is specified for indoor cabin and below-deck environments — saloon, cabin, cockpit interior, and heads. For open outdoor decks exposed to direct sunlight and saltwater spray, a specialist marine vinyl sheet product with enhanced UV stabilisation is required. Contact the sales team to discuss outdoor deck specifications if needed.
The surface achieves R10 non-slip rating (DIN 51130) — the same standard required for commercial kitchen and wet-area flooring. This provides secure footing barefoot on wet cabin surfaces. The embossed surface texture maintains grip under moisture without creating a rough texture that is uncomfortable barefoot.
Yes. Teak vinyl flooring replicates the teak and holly appearance using a high-fidelity print layer with EIR (Embossed-in-Register) surface texture that aligns the visual and tactile grain. The 0.55mm wear layer provides the surface durability required for marine cabin use. Unlike real teak, it requires no oiling, sanding, or sealing — and does not contain wood fibre, so it does not swell or support mould under cabin humidity conditions.
Yes. The core is 100% PVC — no wood fibre content. A fully sealed PVC structure does not absorb water, does not swell, and does not provide an organic substrate for mould growth. Saltwater exposure on the surface is cleaned with a damp mop and pH-neutral cleaner. The adhesive bond, rather than the flooring material itself, is the critical factor in wet-environment installations — use marine-grade contact adhesive on fibreglass substrates.
The wholesale MOQ is 3,000 m² per SKU for standard teak and holly designs. This is higher than the standard LVT MOQ (800 m²) because marine LVT runs are produced in dedicated production batches to maintain colour and texture consistency. One 20ft container holds approximately 4,500 m² of 3mm marine LVT. For custom OEM orders with specific plank widths or holly strip colours, the MOQ is also 3,000 m² per custom SKU, with a 20–30 day lead time from design approval.
Standard certifications available per shipment include: CE EN 14041 (Declaration of Performance, issued in importer’s name), ISO 9001:2015 factory certification, and product data sheet with full material composition (suitable for customs clearance and trade specification). FloorScore and GREENGUARD Gold are available on request for distributors supplying marine LVT to projects with indoor air quality requirements. Contact the sales team for the full certification pack.
Standard sizes are 965×1245mm and 965×1560mm. Custom sheet dimensions are available for OEM boat builders who require specific cut-to-fit panels for a particular hull geometry. Custom plank width (75–200mm) and holly strip colour (white, grey, black, or custom) are available for OEM orders at 3,000 m² MOQ per custom SKU. A production sample is provided for approval before full production begins.
Ecoflors supplies marine vinyl flooring wholesale to importers, boat builders, and refit yards in the United States, European Union, and Australia — the three largest markets for production powerboat and pontoon manufacturing. FOB price from Ningbo. Full commercial documentation (packing list, invoice, CE DoP) included per shipment. See the US wholesale page and import from China guide for logistics details.
Wholesale & OEM
Marine Vinyl Flooring
Quote in 24 Hours.
Tell us the product (teak and holly standard or custom OEM), thickness (2mm / 2.5mm / 3mm), dimensions, order volume, and destination (US / EU / Australia). A complete FOB quotation with product data sheet and CE documentation is returned within one business day.
Flooring Quote
Specify product type, thickness, volume, and destination. FOB quotation, product data sheet, and CE documentation returned within one business day.
Or email sales@ecoflors.com. Sample kit dispatched within 5 business days.
Ecoflors · Marine Vinyl Flooring · Teak Vinyl Flooring for Boats · Factory Direct · Wholesale · OEM/ODM · US · EU · Australia
Teak & Holly Design · Teak and Holly Boat Flooring · Vinyl Boat Flooring · Non-Slip Boat Flooring · Waterproof PVC Structure · 0.55mm Wear Layer · R10 Non-Slip · Glue-Down LVT
2mm · 2.5mm · 3mm · 965×1245mm · 965×1560mm · Custom OEM Width & Colour · 10-Year Warranty · MOQ 3,000 m² · CE EN 14041 · ISO 9001:2015 · FOB Ningbo