• FOB Shanghai by default
  • MOQ confirmed by product & colour
  • Technical data sheet for every SKU
Rigid core click · Manufacturer & B2B supply

Stone-Look SPC
Vinyl Tile Flooring

Stone and marble visuals in rigid-core interlocking vinyl tiles for importers, distributors and private-label ranges.

Start with the visual. Match the tile format, surface and complete SPC build before comparing quotations.

Interior design reference showing grey stone-look tiles in a contemporary living room
Stone-look interior reference. Room imagery does not identify a specific offered SKU or establish product performance.
SPC core thickness
4–7 mm
Wear-layer options
0.3 / 0.5 / 0.55 / 0.7 mm
Tile format
305 × 610 mm
Larger tile format
457.2 × 914.4 mm
SPC flooring layer construction reference diagram
Construction reference only. The diagram does not declare the dimensions or tested performance of every offered tile.
Define the construction

A clear specification.
From core to finished tile.

Keep core, wear layer and attached pad separate in the request. Use the SKU specification to establish the complete finished thickness.

Construction
Rigid SPC core with click joints; attached IXPE or EVA where selected
SPC core
4–7 mm requested range
Wear layer
0.3, 0.5, 0.55 or 0.7 mm
Tile sizes
305 × 610 mm / 457.2 × 914.4 mm
Finished thickness
Identify the complete board build and pad thickness in the offered specification

These are selection options, not universal combinations. For the broader comparison of core, backing and finished thickness, see the SPC Flooring Hub →

Complete the physical sample

The same visual can feel different.
Review the finish as a whole.

Compare the surface, assembled edge and backing with the selected décor. Open any reference photo to view it full size.

Surface

Coral or leather texture

Review relief and gloss together under direct and side lighting. Texture names alone do not establish a slip rating.

Coral texture reference
Coral texture
Leather texture reference
Leather texture
Edge detail

Compare the joined tiles

No bevel, micro bevel and printed bevel create different visual boundaries. Approve the edge on assembled samples of the actual tile format.

No bevel reference
No bevel
Micro bevel reference
Micro bevel
Printed bevel reference
Printed bevel
Attached backing

Choose the pad with the build

Specify material and thickness. Foam expansion is a separate input; it is not density in kg/m³ or an acoustic rating.

IXPE backing pad reference
IXPE backing pad
EVA backing pad reference
EVA backing pad
IXPE

Pad thickness: 1.0 / 1.5 / 2.0 mm

Foam expansion options: 7.5× / 10× / 15×

EVA

Pad thickness: 1.0 / 1.5 / 2.0 mm

Select the pad as part of the complete SPC construction.

Pad combinations belong to the offered SKU. Use matching assembly evidence for sound-sensitive projects.
Locking system

Match the click joint

The locking profile is part of the selected tile build. Review the offered system, format and installation instructions before approving packaging and samples.

Unilin locking technology brand reference
Locking technology reference

The applicable locking system and documentation are identified for the offered SKU.

Before project approval

Match the evidence
to the floor you are buying.

A stone appearance does not establish a performance class. Give the application and destination alongside the product brief.

Documents by build

List the required fire, slip, emissions and acoustic criteria. Review the product coverage, backing and installation conditions in the applicable documents.

Review flooring documents →

Installation by site

Describe the substrate, room layout, moisture conditions and expected traffic. Include expansion, floor-height transitions and wet-area detailing in the installation review.

Read installation checks →

Visual approval

Inspect joined pieces for repeat, vein direction, colour, gloss and edge detail. Keep the approved physical reference with the product specification.

Request a sample set →
Ecoflors OEM design and packaging reference for vinyl flooring
Packaging reference. Agree the actual artwork and components for the order.
OEM & private-label ranges

Approve the product.
Then build the brand programme.

Send the selected décor and SPC build with your target quantity, market and packaging requirements. Keep the carton marks, labels and product information consistent with the approved SKU.

For colour development, provide a physical reference or a clear design brief. Development, tooling and artwork approval need their own agreed scope.

View the OEM & private-label programme →
Buyer questions

Before you order
stone-look SPC tiles.

The visual, product specification and project requirements should describe the same proposed floor.

Is this natural stone, ceramic or porcelain tile?
No. This page covers vinyl tile with a rigid SPC core, a printed stone or marble appearance and click joints. Approve a physical sample for colour, surface and edge detail; the appearance does not make it natural stone.
What thickness and wear-layer options can I request?
The requested SPC core range is 4–7 mm, with 0.3, 0.5, 0.55 or 0.7 mm wear layers. Specify the core and attached pad separately. Availability of the complete décor, format and build combination is reviewed for your order; do not treat these choices as an all-combinations matrix.
Which tile sizes are covered on this page?
The format options are 305 × 610 mm and 457.2 × 914.4 mm. Send the preferred size with your décor code and build. The images show design references, not an exact representation of every format or installed repeat.
Is this a floating click floor or glue-down LVT?
This page focuses on rigid SPC click tiles for floating installation under the product instructions. Dryback LVT is a different product route bonded to the subfloor. Choose the installation system before comparing product prices.
Can I use it in a bathroom or commercial area?
Review the actual location, traffic, slip requirement, fire classification and installation system for the specified SKU. A water-resistant board does not make its joints or the complete floor installation watertight. Commercial suitability needs product-specific evidence.
Does a thicker IXPE or EVA pad guarantee a better acoustic result?
No. Pad thickness and IXPE foam expansion ratio are product inputs, not sound ratings. Acoustic performance must refer to a tested floor assembly and the required metric. Ask for evidence matching the proposed construction.
Do the tiles need grout between them?
These are click-jointed vinyl tiles, not a conventional grouted ceramic installation. Review assembled samples to select the visual joint and follow the specified expansion and perimeter details. Do not add grout or sealant without the product instructions.
What should I send for samples or an OEM quotation?
Send the décor codes, core and finished-thickness requirements, wear layer, format, surface, edge and backing. Add quantity per colour, target market, application, timing and packaging needs. Approve physical samples and applicable documents before confirming the order.
1